Leveling Kits (Lifts Front to Level Your Truck)

You are here: Home > Toyota > Tacoma > Leveling Kits (Lifts Front to Level Your Truck)

Sort By

2005-2016 Toyota Tacoma 4WD and 2WD Prerunner 2.25" Front Strut Extension -- 66-5055

2005-2016 Toyota Tacoma 4WD and 2WD Prerunner 2.25" Front Strut Extension -- 66-5055

Sale Price: $229.95

Product Details:

ReadyLift Strut Extension
Powder coated 7mm steel plate
Fixed lift of 2.25 inches
10.9 Rated mounting studs
Keeps your factory ride - Guaranteed
Will never wear, break, or fail- Guaranteed
Toughest finish- Guaranteed
Safest way to level lift- Guaranteed

This item fits:

2005-2016 Toyota Tacoma/Prerunner 2WD/4WD - 6 Lug

Note: It is ReadyLift's position that our objective is to provide a product that levels the vehicle. Through on-going research we have discovered that Toyota trucks have a unique pattern of being manufactured and sold with varying degrees of rear to front rake. It appears that many Toyota trucks are not the same height or possess the same rake as the same stock truck sitting next to it. Our research has determined there can be as much as 1.0" difference in rake and ride height from truck to truck. TRD-equipped trucks often have only 1.0" of rake compared to a non-TRD truck. Measurements on some customer's trucks have revealed as much as 1.0" difference in the factory front end height.
If you measure the truck at stock height, then install a 3" strut extension and determine after installation and alignment that the truck sits nose high, you most likely are an owner of one of the trucks that has less rear to front rake. To compensate for the difference, ReadyLift suggests installing one of our 1.0" (66-5001) Rear Block Kits to achieve a slight rake to a level stance.

NOTE: 2011-2015 Tacoma applications: Toyota made minor changes to the Tacoma upper control arm suspension geometry. In some cases adding a leveling kit MAY affect the ability to correct the caster alignment to within factory specifications. If you have a 2011-2015 Tacoma with a leveling kit and the caster alignment specs cannot be put back to factory your truck will require an aftermarket upper control arm with adjustable caster/camber.

* NOTE: 2013-2015 Tacoma TRD models require purchase of Sway Bar Relocation bracket