 |
 |
 |
|
ReadyLift leveling kits are the fastest, safest, least expensive way to bring the front of your vehicle level with the rear. Our innovative Smart Strut Technology mounts on top of the strut assembly, eliminating the hassle, time and danger of compressing springs. ReadyLift steel strut extension will maintain a smooth OEM ride without adding pressure to stock suspension components, guaranteed!
66-5075The strut extension provides 2.4" of lift which gives clearance to add up to 33" wheels and tires to the Toyota Tundra. Installation is simple and requires no strut preloading, cutting, or modification of factory installed parts. While other kits cost thousands to buy and hours to install, ReadyLift can be installed one to two hours and costs less than the price of a single custom wheel.
Note:
It is ReadyLIFTs position that our objective is to provide a product
that levels the vehicle. Through on-going research we have discovered
that Toyota trucks have a unique pattern of being manufactured and sold
with varying degrees of rear to front rake. It appears that many Toyota
trucks are not the same height or possess the same rake as the same
stock truck sitting next to it. Our research has determined there can be
as much as 1.0 difference in rake and ride height from truck to truck.
TRD-equipped trucks often have only 1.0 of rake compared to a non-TRD
truck. Measurements on some customers trucks have revealed as much as
1.0 difference in the factory front end height.
If
you measure the truck at stock height, then install a 3 strut extension
and determine after installation and alignment that the truck sits nose
high, you most likely are an owner of one of the trucks that has less
rear to front rake. To compensate for the difference, ReadyLift suggests
installing one of our 1.0 (66-5001) Rear Block Kits to achieve a
slight rake to a level stance.
All ReadyLift products are backed by a lifetime warranty for as long as you own your vehicle and includes all necessary parts, hardware, detailed installation instructions, and two color decals.
NOTE: 2010-2015 Tundra trucks with the 4.6 V8 engine will required 66-5001 1" rear block kit for a level stance.
Product Details:
- ReadyLift Strut Extension
-
Powder coated 7mm steel plate
-
Fixed lift of 2.4 inches
-
10.9 Rated mounting studs
-
Keeps your factory ride - Guaranteed
-
Will never wear, break, or fail- Guaranteed
-
Toughest finish- Guaranteed
-
Safest way to level lift- Guaranteed
This item fits:
- 2007-2016 Toyota Tundra 2WD/4WD
|
|
|
 |
|
 |
|
|
| Accessories for this product... |
|
|
|
|
GREAT!! 
