Features & Benefits:
- CNC formed steel sub-frame assemblies - bolt on installation.
- Covered under the ReadyGuard Powertrain Warranty
- Includes SST3000 Rear Shocks
- Patent Pending steering extension to retain factory steering quality.
- Special Plascoat performance polymer alloy long lasting and tough crack and scratch resistent finish.
- Exclusive differential drop bracket system to insure correct CV angles.
- Extreme duty cast iron steering knuckles designed to retain OEM ball joint and suspension geometry.
- Fabricated heavy duty steel 7.0" lift strut extensions allows you to retain your factory front struts.
- Patent Pending rack & pinion steering drop system - first of its kind!
- OEM style 5.0" tall rear block provides 4.0" of rear lift.
- The 44-2175 7.0" kit has been tested and meets the rigorous FVMSS certification standards for safety and quality.
- Install Time: 6 - 8 hours
- Max Tire: 37 x 12.50
- Does NOT increase front track width - Allows for use of OEM wheels
- Wheel Width: Stock Wheels Ok or 9 wheel w/ 4.75 - 5.5 BS
- Factory Aluminum Wheel with 5.75 BS - 35x12.50 x 17 with no trimming* at 7 ride height
- 17 x 8 Aftermarket Wheel with 4.75-5.5 BS - 35x12.50 x 17 with no trimming at 7 ride height
- 18 x 9 Aftermarket Wheel with 4.75-5.5 BS - 35x12.50 x 18 with no trimming* at 7 ride height
- 20 x 9 Aftermarket Wheel with 4.75-5.5 BS - 35x12.50 x 20 with no trimming* at 7 ride height
*There
are many different variations of manufacturer aftermarket tire and wheel
combinations in both width, actual diameter, tread pattern, etc. It is
up to the installer to determine wheel and tire fitment on the vehicle
and guarantee that there is no rubbing of the tire on any components,
both inside, and outside surfaces. The above guide is for reference
only.
Bonus - No need to cut your steering rods like on
other kits which requires the tie rods to be shortened. This results in
reduced steering radius. Our steering rack drop down system allows you
to retain your stock tie rods without modifying them.
Bonus - The ReadyLIFT MLS lift kits are the only
lift kits that will allow you to use your factory spare wheel and tire
in case of a flat.
